The TP-Link 5-Port Gigabit Desktop PoE+ Switch with 1-Port PoE++ In and 4-Port PoE+Out (TL-SG1005P-PD) supports wired network expansion with • 5× 10/100/1000Mbps RJ45 Ports• 1× 10/100/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af/at/bt Type3/bt Type4)• 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at)• AUTO Negotiation• AUTO MDI/MDIX. Its unmanaged design suits installations that need straightforward connectivity without a management interface.
A fanless design avoids fan noise, making this model suitable for locations where network equipment sits near staff or customers. Allow the ventilation clearance specified by the manufacturer and select a mounting position that keeps cables accessible.
PoE-equipped ports can supply compatible access points, IP phones or cameras through the same cable that carries data. Size the connected equipment against both the per-port power limit and the total switch budget. The available output depends on the input power source, so check the documented input and output combinations before ordering.
Key features and benefits
- Expand wired connectivity with plug-and-play installation and no switch configuration step.
- Keep workspaces quieter with a fanless design.
- Carry power and data to compatible endpoints over the network cable, within the specified PoE standard and shared budget.
- Position the switch using the documented desktop or wall mounting arrangement.
Technical details
| Interface |
• 5× 10/100/1000Mbps RJ45 Ports• 1× 10/100/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af/at/bt Type3/bt Type4)• 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at)• AUTO Negotiation• AUTO MDI/MDIX |
| PoE Ports (RJ45) |
• PoE In Port: Port 5, Compliance with 802.3af/at/bt Type3/bt Type4• PoE Out Ports: Ports 1-4, compliance with 802.3af/at• PoE Power Budget:-66 W when powered by 802.3bt Type 4 (90 W)-47 W when powered by 802.3bt Type 3 (60 W)-21 W when powered by 802.3at (30 W)-9 W when powered by 802.3af (15.4 W) |
| Switching Capacity |
10 Gbps |
| Packet Forwarding Rate |
7.44 Mpps |
| MAC Address Table |
2k |
| Power Supply |
Only Powered by PoE Device |
| Max. Power Consumption |
• 2.68 W (90W PoE In, with no PD connected)• 68.59 W (90W PoE In, with 66 W PD connected) |
| Dimensions ( W x D x H ) |
6.2 × 4.0 × 1.0 in (158 × 101 × 25 mm) |
Package contents
• TL-SG1005P-PD• Installation Guide
Check the supplied hardware revision before matching firmware, optical modules, power equipment or replacement mounting parts. Optional accessories are sold separately unless included in the package contents.