The StarTech 1m Black Shielded Cat6a Ethernet Patch Cable (6ASPAT1MBK) provides a short copper network connection between compatible RJ45 Ethernet ports. Its 1 m length suits links between nearby equipment, a device and a patch panel, or the data and powered-device sides of an indoor PoE installation.
The Cat6a construction supports Ethernet connections up to 10GbE, allowing the same patch lead to serve compatible Gigabit and multigigabit equipment. Shielding helps reduce the effect of electromagnetic interference when the complete installation is properly specified and bonded.
Use the lead where a flexible indoor patch cable is required. Route it without tight bends or tension at the connectors, and keep the retaining clips accessible for maintenance.
PoE capability does not supply power by itself: the source, receiving device and cable must form a compatible power connection. This is an indoor cable; an outdoor access point or gateway needs appropriately rated cabling on any exposed section. Use Ethernet ports only, not RJ45 serial-console ports.
Key features and benefits
- Connect nearby network equipment without an unnecessarily long patch lead.
- Protect connector clips with snagless boots and support the terminations with strain relief.
- Retain a copper patch connection when moving to compatible 10GbE equipment.
Technical details
| Length |
1 m |
| Colour |
Black |
| Connectors |
RJ45 male to RJ45 male |
| Category |
Cat6a |
| Shielding |
Shielded twisted pair (STP) |
| Jacket |
PVC |
| PoE rating |
Manufacturer-rated up to 100 W; compatible power source and receiving device required |
| Documented Ethernet rate |
Up to 10 Gbps |