The TP-Link Omada 6-Port 10GE L2+ Managed Switch with 4-Port PoE++ (SX3206HPP) supports wired network expansion with • 4× 100/1000/2500/5000/10000 Mbps RJ45 Ports• 2× 10G SFP+ Slots• 1× RJ45 Console Port• 1× Micro-USB Console Port. Its documented management functions provide control over how supported network traffic is handled, helping match the switch to the installation’s requirements.
PoE-equipped ports can supply compatible access points, IP phones or cameras through the same cable that carries data. Size the connected equipment against both the per-port power limit and the total switch budget. Devices with higher power requirements must match the switch’s supported PoE standard; a shared budget cannot be drawn in full from every port at once.
VLAN support can separate appropriate traffic groups; quality-of-service controls can prioritise supported traffic; static routing can handle supported communication between local subnets. Configure these functions against the site’s addressing, security and application requirements, using the feature set available in the selected management mode.
Compatible Omada controller management allows supported settings to be coordinated with the wider network. Check controller capacity, device firmware and any controller-mode feature requirements before deployment. The switch’s standalone and controller-managed capabilities can differ.
Optical uplinks require a supported transceiver and matching fibre, or a compatible direct attach cable. Select the host-port speed, connector type, fibre specification and distance together. A management console port must not be treated as an Ethernet data connection.
Key features and benefits
- Carry power and data to compatible endpoints over the network cable, within the specified PoE standard and shared budget.
- Separate supported traffic groups with VLAN controls for a more organised network.
- Prioritise supported application traffic with quality-of-service controls.
- Handle supported traffic between local subnets with static routing.
- Support resilient ring deployments with Ethernet Ring Protection Switching.
- Manage supported settings alongside other Omada devices through a compatible controller.
- Integrate the switch into a rack-based installation using its specified mounting arrangement.
Technical details
| Interface |
• 4× 100/1000/2500/5000/10000 Mbps RJ45 Ports• 2× 10G SFP+ Slots• 1× RJ45 Console Port• 1× Micro-USB Console Port |
| PoE Ports (RJ45) |
• Standard: 802.3af/at/bt (type 3) compliant**• PoE+ Ports: 4 Ports, up to 60 W per port• Power Budget: 200 W* |
| Switching Capacity |
120 Gbps |
| Packet Forwarding Rate |
89.28 Mpps |
| MAC Address Table |
32 K |
| Power Supply |
100-240 V AC~50/60 Hz |
| Max. Power Consumption |
244.90 W (110V/60Hz) (with 200 W PD connected) |
| Dimensions ( W x D x H ) |
11.6×7.1×1.7 in (294×180×44 mm) |
| Mounting |
• Rack Mountable• Desktop |
Package contents
• SX3206HPP Switch• Power Cord• Quick Installation Guide• Rackmount Kit• Rubber Feet
Check the supplied hardware revision before matching firmware, optical modules, power equipment or replacement mounting parts. Optional accessories are sold separately unless included in the package contents.