The TP-Link Omada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ Out (SG2005P-PD) supports wired network expansion with • 1× 10/100/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af/at/bt)• 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at PoE). Its documented management functions provide control over how supported network traffic is handled, helping match the switch to the installation’s requirements.
PoE-equipped ports can supply compatible access points, IP phones or cameras through the same cable that carries data. Size the connected equipment against both the per-port power limit and the total switch budget. The available output depends on the input power source, so check the documented input and output combinations before ordering.
VLAN support can separate appropriate traffic groups; quality-of-service controls can prioritise supported traffic; static routing can handle supported communication between local subnets. Configure these functions against the site’s addressing, security and application requirements, using the feature set available in the selected management mode.
Compatible Omada controller management allows supported settings to be coordinated with the wider network. Check controller capacity, device firmware and any controller-mode feature requirements before deployment. The switch’s standalone and controller-managed capabilities can differ.
Key features and benefits
- Carry power and data to compatible endpoints over the network cable, within the specified PoE standard and shared budget.
- Separate supported traffic groups with VLAN controls for a more organised network.
- Prioritise supported application traffic with quality-of-service controls.
- Handle supported traffic between local subnets with static routing.
- Manage supported settings alongside other Omada devices through a compatible controller.
- Position the switch using the documented desktop or wall mounting arrangement.
Technical details
| Interface |
• 1× 10/100/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af/at/bt)• 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at PoE) |
| PoE Ports (RJ45) |
• PoE In Port: Port 5, Compliance with 802.3af/at/bt• PoE Out Ports: Ports 1-4, compliance with 802.3af/at PoE• PoE Power Budget:-64 W when powered by 802.3bt Type 4 (90 W)-44 W when powered by 802.3bt Type 3 (60 W)-19 W when powered by 802.3at-6 W when powered by 802.3af |
| Switching Capacity |
10 Gbps |
| Packet Forwarding Rate |
7.44 Mpps |
| MAC Address Table |
8k |
| Power Supply |
Obtain Power from 802.3af/at/bt PoE Source |
| Max. Power Consumption |
71.5 W (when powered by 802.3bt Type 4 (90 W)) |
| Dimensions ( W x D x H ) |
3.9 × 1.5 × 6.7 in (100 × 38.5 × 170 mm) |
Package contents
• SG2005P-PD• Mounting Kits• Installation Guide
Check the supplied hardware revision before matching firmware, optical modules, power equipment or replacement mounting parts. Optional accessories are sold separately unless included in the package contents.