The TP-Link Omada 10-Port Gigabit Easy Managed Switch with 8-Port PoE+ (ES210GMP) supports wired network expansion with • 8× 10/100/1000 Mbps PoE+ RJ45 Ports (support 802.3af PoE and 802.3at PoE+)• 1× 10/100/1000 Mbps RJ45 Port• 1× Gigabit SFP/RJ45 Combo Port• Auto-Negotiation/Auto MDI/MDIX. Its documented management functions provide control over how supported network traffic is handled, helping match the switch to the installation’s requirements.
A fanless design avoids fan noise, making this model suitable for locations where network equipment sits near staff or customers. Allow the ventilation clearance specified by the manufacturer and select a mounting position that keeps cables accessible.
PoE-equipped ports can supply compatible access points, IP phones or cameras through the same cable that carries data. Size the connected equipment against both the per-port power limit and the total switch budget. Devices with higher power requirements must match the switch’s supported PoE standard; a shared budget cannot be drawn in full from every port at once.
VLAN support can separate appropriate traffic groups; quality-of-service controls can prioritise supported traffic. Configure these functions against the site’s addressing, security and application requirements, using the feature set available in the selected management mode.
Compatible Omada controller management allows supported settings to be coordinated with the wider network. Check controller capacity, device firmware and any controller-mode feature requirements before deployment. The switch’s standalone and controller-managed capabilities can differ.
Optical uplinks require a supported transceiver and matching fibre, or a compatible direct attach cable. Select the host-port speed, connector type, fibre specification and distance together. A management console port must not be treated as an Ethernet data connection.
Key features and benefits
- Keep workspaces quieter with a fanless design.
- Carry power and data to compatible endpoints over the network cable, within the specified PoE standard and shared budget.
- Separate supported traffic groups with VLAN controls for a more organised network.
- Prioritise supported application traffic with quality-of-service controls.
- Help protect the network from accidental cabling loops using the documented loop-protection functions.
- Manage supported settings alongside other Omada devices through a compatible controller.
- Position the switch using the documented desktop or wall mounting arrangement.
Technical details
| Interface |
• 8× 10/100/1000 Mbps PoE+ RJ45 Ports (support 802.3af PoE and 802.3at PoE+)• 1× 10/100/1000 Mbps RJ45 Port• 1× Gigabit SFP/RJ45 Combo Port• Auto-Negotiation/Auto MDI/MDIX |
| PoE Ports (RJ45) |
• Standard: 802.3af PoE and 802.3at PoE+ compliant• PoE Ports: 8 ports• PoE Budget: 123W available for all PoE+ ports, 30W max per port• Fast PoE & Perpetual PoE• PoE Auto Recovery‡• Up to 250m PoE transmission distance** |
| Switching Capacity |
20 Gbps |
| Packet Forwarding Rate |
14.88 Mpps |
| MAC Address Table |
8K |
| Power Supply |
AC/DC Adapter (Input: 100-240V AC; Output: 53.5V DC/2.43A) |
| Dimensions ( W x D x H ) |
8.2×4.9×1.0 in (209×126×26 mm) |
Package contents
• ES210GMP• Power Adapter• Installation Guide• Rubber Feet
Check the supplied hardware revision before matching firmware, optical modules, power equipment or replacement mounting parts. Optional accessories are sold separately unless included in the package contents.