The TP-Link Omada 1000Base-BX WDM Bi-Directional SFP Module (SM321B-2) adds the connection described in the technical details to a compatible TP-Link network port. Gigabit WDM Bi-Directional SFP Module, single-mode, LC connector, TX: 1310 nm/RX: 1550 nm, 2 km. It is intended for the specific gateways and switches listed below, with the matching module type selected for the port being used.
Match the fibre type, connector, wavelength and supported link distance at both ends. Multimode and single-mode modules serve different fibre installations, and the complete optical path must meet the requirements of the selected transceiver.
Install the module using the host equipment’s handling and configuration guidance. The figures below describe the manufacturer’s current published revision; verify the supplied revision where supported reach or features differ between versions.
Key features and benefits
- Match the network uplink to the installed cabling and host port.
- Replace an individual module when changing or maintaining the link.
- Specify the complete connection using the manufacturer’s interface requirements.
Technical details
| Standards and Protocols |
IEEE 802.3z, TCP/IP |
| Wave Length |
• Tx: 1310 nm• Rx: 1550 nm |
| Dimensions ( W x D x H ) |
2.2*0.6*0.5 in (55.4*14.6*12.9 mm) |
| Power Supply |
3.3V |
| Safety & Emission |
FCC, CE |
| Cable |
Single-Mode Fiber |
| Fiber Type |
9/125 μm Single-Mode |
| Max. Cable Length |
2 KM |
| Data Rate |
1.25 Gbps |
| Port Type |
LC Simplex |
| Hardware Features |
• DDM• SFP-MSA• Hot Swappable |
Compatibility
DR3220V-4G, ER8411, SG3428MP, SG6428X, SG6654X, SG3210, SG3452XP, ER706W-4G, SG3452, ER706WP-4G, SG6428XHP, SX6632YF.
Use the complementary SM321A-2 at the far end of the fibre link. Match the A/B pair, wavelength directions and distance rating; two identical directional modules do not form the specified BiDi pair.
Optional accessory sold separately. Check the host hardware revision and installation requirements before ordering.