{"product_id":"tp-link-sg2005p-pd","title":"TP-Link Omada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ Out (SG2005P-PD)","description":"\u003cp\u003eThe TP-Link Omada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ Out (SG2005P-PD) supports wired network expansion with • 1× 10\/100\/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af\/at\/bt)• 4× 10\/100\/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af\/at PoE). Its documented management functions provide control over how supported network traffic is handled, helping match the switch to the installation’s requirements.\u003c\/p\u003e\u003cp\u003ePoE-equipped ports can supply compatible access points, IP phones or cameras through the same cable that carries data. Size the connected equipment against both the per-port power limit and the total switch budget. The available output depends on the input power source, so check the documented input and output combinations before ordering.\u003c\/p\u003e\u003cp\u003eVLAN support can separate appropriate traffic groups; quality-of-service controls can prioritise supported traffic; static routing can handle supported communication between local subnets. Configure these functions against the site’s addressing, security and application requirements, using the feature set available in the selected management mode.\u003c\/p\u003e\u003cp\u003eCompatible Omada controller management allows supported settings to be coordinated with the wider network. Check controller capacity, device firmware and any controller-mode feature requirements before deployment. The switch’s standalone and controller-managed capabilities can differ.\u003c\/p\u003e\u003ch2\u003eKey features and benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCarry power and data to compatible endpoints over the network cable, within the specified PoE standard and shared budget.\u003c\/li\u003e\n\u003cli\u003eSeparate supported traffic groups with VLAN controls for a more organised network.\u003c\/li\u003e\n\u003cli\u003ePrioritise supported application traffic with quality-of-service controls.\u003c\/li\u003e\n\u003cli\u003eHandle supported traffic between local subnets with static routing.\u003c\/li\u003e\n\u003cli\u003eManage supported settings alongside other Omada devices through a compatible controller.\u003c\/li\u003e\n\u003cli\u003ePosition the switch using the documented desktop or wall mounting arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical details\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003e• 1× 10\/100\/1000 Mbps RJ45 PoE In Ports (compliance with 802.3af\/at\/bt)• 4× 10\/100\/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af\/at PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePoE Ports (RJ45)\u003c\/th\u003e\n\u003ctd\u003e• PoE In Port: Port 5, Compliance with 802.3af\/at\/bt• PoE Out Ports: Ports 1-4, compliance with 802.3af\/at PoE• PoE Power Budget:-64 W when powered by 802.3bt Type 4 (90 W)-44 W when powered by 802.3bt Type 3 (60 W)-19 W when powered by 802.3at-6 W when powered by 802.3af\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitching Capacity\u003c\/th\u003e\n\u003ctd\u003e10 Gbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePacket Forwarding Rate\u003c\/th\u003e\n\u003ctd\u003e7.44 Mpps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMAC Address Table\u003c\/th\u003e\n\u003ctd\u003e8k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Supply\u003c\/th\u003e\n\u003ctd\u003eObtain Power from 802.3af\/at\/bt PoE Source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. Power Consumption\u003c\/th\u003e\n\u003ctd\u003e71.5 W (when powered by 802.3bt Type 4 (90 W))\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions ( W x D x H )\u003c\/th\u003e\n\u003ctd\u003e3.9 × 1.5 × 6.7 in (100 × 38.5 × 170 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003ePackage contents\u003c\/h2\u003e\u003cp\u003e• SG2005P-PD• Mounting Kits• Installation Guide\u003c\/p\u003e\u003cp\u003eCheck the supplied hardware revision before matching firmware, optical modules, power equipment or replacement mounting parts. Optional accessories are sold separately unless included in the package contents.\u003c\/p\u003e","brand":"TP-LINK","offers":[{"title":"Default Title","offer_id":57782190375285,"sku":"SG2005P-PD","price":82.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/1002\/2321\/files\/tp-link-sg2005p-pd-500-transparent.png?v=1794789939","url":"https:\/\/www.kestronics.co.uk\/products\/tp-link-sg2005p-pd","provider":"Kestronics","version":"1.0","type":"link"}