|
General |
|
Microcontroller |
High-speed
advanced RISC processor |
|
Input Options |
Undecoded laser
scanner, undecoded CCD scanner,
undecoded wand, undecoded slot
reader |
|
Output
Interface |
Keyboard wedge,
TTL serial (RS-232C w. RS-232 chip)
supports baud rates from 2400 to
38400 |
|
Symbologies
Decoded |
Code 39,
Interleaved 2 of 5, Code 128,
Codabar, MSI/Plessey, Code 93, Code
4, Code 5, Code 11, BC412, UPC-A,
UPC-E, EAN-13, and EAN-8 |
|
Beep Tone |
Available with
the addition of a beeper (with a
diode, transistor, and resistor) |
|
Indicator |
10 mA single-color
LED |
|
“Good Read”
Output Signal |
Yes |
|
Trigger line |
Yes |
|
User Programmable
Features |
|
Enable/disable
individual symbologies |
|
Enable/disable,
send/suppress check digit |
|
Send/suppress
start/stop character |
|
Minimum/maximum
code length |
|
Send/suppress
EAN country code digits |
|
Enable/disable
UPC/EAN separator/supplemental code
ID |
|
Verifi cation
before good read |
|
Trigger mode |
|
RS-232 options |
Baud rate, data
bits, stop bits, parity, fl ow
control. |
|
Additional Components
for the Basic Decode Subsystem |
|
8 MHz Crystal |
HC-49S
recommended |
|
DS1811 Reset
IC |
SOT-23
recommended |
|
0.047 uf
Capacitor |
0805
recommended |
|
22 pf
Capacitor |
0805 (two
recommended) |
|
24.7 K
Resistor |
0805 (four
recommended) |
|
Mechanical |
|
Package |
TQFP-44 |
|
Scan Rates |
Laser scanner : Up to 60
scans per second.
CCD scanner : Up to 100 scans
per second.
Wand : 3 to 100 inches per
second on a 10 mil code |
|
Supply Voltage |
+5 VDC |
|
Current Draw |
Typical 15 mA.
(“Power Down” mode 0.7 mA.) |
|
Operating
Temperature |
32° F to 155° F
(0° C to 70° C) |
|
Storage
Temperature |
-85° F to 302°
F (-65° C to 150° C) |
|
Chip
Dimensions (Overall) |
TQFP-44
Length (maximum):0.48 inches
(12.25mm)
Width (maximum): 0.48 inches
(12.25mm).
Thickness (maximum): 0.047 inches
(1.20mm). |
